Polymer
& Engineering Compounds ||
VINYL
||
FLEX
||
PLENE
||
BATCH
||
XL
||
VA
| ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
 |
EVA COMPOUNDS |
SPECIFICATIONS
OF KLJ VA COMPOUNDS |
| PROPERTIES |
COLOUR |
SURFACE
FINISH |
SPECIFIC
GRAVITY |
HARDNESS
(SHORE A) |
EXPANSION
(%) |
APPLICATION |
| UNIT |
N.A. |
N.A. |
(After
Expansion) |
(Shore
A)
(After Expansion) |
At
175 ± 3oC |
|
Test Method |
ASTM
D1003/ KLJ-TM-01 |
KLT-TM-02 |
ASTM
D792 |
ASTM
D2240 |
KLJ
TM-03 |
|
Grade |
| KS T-1 (All
Colours) |
AS PER VISUAL MATCHING |
Should
be free from Contamination Hard Particles
& Bubbles/ Pin Holes |
0.25 ±
0.05 |
39-47 |
57-61 |
Injection
Moulding/ Compression Moulding |
| KS (N-1) (All
Colours) |
0.25 ±
0.05 |
39-47 |
57-61 |
Injection
Moulding |
| KS EXPH-1.35
(All Colours) |
0.35 ±
0.05 |
55-60 |
32-38 |
Injection
Moulding |
| KS EXPH-1.43
(All Colours) |
0.25 ±
0.05 |
55-60 |
40-47 |
Injection
Moulding |
| KS EXPH-1.60
(All Colours) |
0.25 ±
0.05 |
42-48 |
57-63 |
Injection
Moulding |
| KS EXPH-1.80
(All Colours) |
0.20 ±
0.05 |
26-34 |
77-83 |
Injection
Moulding |
|
KLJ-EVA Compounds can be specifically tailor made as
per customer's requirement to achieve various
hardness, expansion and abrasion etc.
PROCESSING GUIDE LINE
For Listing KLJ VA, the Temperatures Recommended are
as:-
| Injection Temp |
-- |
95° C To 100°
C |
| Mould Temp |
-- |
165° To 170° C |
The above temperatures are given for guidelines only
and the user is advised to set the temperatures
according to their requirement.
The properties of the compounds are indicative &
represent the values as tested in our laboratories.
There is no warranty/ guarantee whatsoever. The
suitability of the grade for the particular
application may be verified before use.
