Plasticizers Phthalates || Maleate Plasticizers || Phosphate Esters || Speciality Plasticizers || Sulpho Chloro Paraffin || Chlorinated Paraffin (CP)

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

PRODUCT DATA SHEET

PLASTICIZERS (SPECIALITY)

PRODUCT SPECIFICATION	TEST METHOD	DI-OCTYL ADIPATE DOA	DI-METHYL ADIPATE DMA	TRI-OCTYL TRIMELLITATE TOTM	TRI-BUTYL CITRATE TBC	ACETYL TRI-BUTYL CITRATE ATBC	n-BUTYL STEARATE nBS	OCTYL STEARATE OS	DI-OCTYL SEBACATE DOS	DI ISO NONYL CYCLOHEX ANOATE DINCH
APPEARANCE	PHYSICAL	WATER WHITE CLEAR LIQUID
COLOUR IN MAX HAZEN UNIT	ASTM- D-1045-86	30	40	50	50	40	60	60	40	40
VOLATILE LOSS (130ºC for 3 hrs. % By Mass) Max	KLJ TM- P-11-92	0.15	0.3 (110ºC for 1 Hour)	0.10	0.40	0.40	0.20 (110ºC for 2 Hrs.)	0.20	0.20	0.20
ACIDITY % (AS ACID) BY MASS, Max.	ASTM- D-1045-86	0.02	0.05	0.03	0.02	0.02	0.02	0.5	0.02	0.02
ACIDITY AFTER HEAT TREATMENT (1800C FOR 2 HRS.) % MASS, Max	ISI- 9591-96	0.02	---	0.03	0.03	0.03	---	---	0.03	---
HEAT STABILITY at 180ºC for 2 Hrs.	ISI- 9591-96	40 Hu.	50 Hu. (150°C/2Hrs.)	50 Hu.	NO CHANGE IN COLOUR (150ºC, 2 Hrs.	NO CHANGE IN COLOUR (150ºC, 2 Hrs.)	NO CHANGE IN COLOUR (150ºC, 2 Hrs.)	NO CHANGE IN COLOUR	NO CHANGE IN COLOUR	NO CHANGE IN COLOUR
SPECIFIC GRAVITY AT 27º C	ASTM- D-1045-86	0.924 ± 0.002	1.060 ± 0.003	0.990 ± 0.005	1.042 ± 0.005	1.050 ± 0.005	0.85 -- 0.86	0.860 ± 0.005	0.915 ± 0.005	0.950 ± 0.005
REFRACTIVE INDEX AT 27º C	ASTM- D-1045-86	1.448 ± 0.002	1.427 ± 0.005	1.4860 ± 0.0013	1.4430 ± 0.003	1.4410 ± 0.003	1.445 ± 0.005	1.445 ± 0.005	1.447 ± 0.005	1.463 ± 0.005
ESTER VALUE B (mg KOH/gm)	ASTM- D-1045-86	304 ± 1	584 ± 3	306.5 ± 3.5	468 ± 3	559 ± 3	162.5 ± 2.5	142.5 ± 2.5	263 ± 3	265 ± 3
ESTER CONTENT % BY WEIGHT, Min.	ASTM- D-1045-86	99.5	99.5	99	99	99	99.5	99.5	99.5	99.5
PLASTICIZING ESTERS By GLC Min. %	KLJ TM- P-12-98	99.5	99.5	99	99	99	99	99	99	99.5
MOISTURE % By mass Max	ASTM- E-203	0.1	0.4	0.1	0.3	0.25	0.1	0.1	0.1	0.1
VISCOSITY at 20ºC in CPS	KLJ TM- P-13-97	14 ± 2 (at 25°C)	---	274.5 ± 2.5	32.9	32.7	10 - 12 (at 25ºC)	18 - 20 (at 25ºC)	59 -- 63	---
BOILING AT ATM. PR (in ºC)	IS : 5298-73	335	--	---	---	---	343	---	---	---
Iodine Value Max.	British Pharm.-88	---	---	---	---	---	2.5 PPM	2.5 PPM	---	---

APPLICATIONS:-

Footwear • Cables & Flexible PVC Films • Leather Cloth • Vinyl Flooring • Medical Equipments • Non-toxic food containers • Adhesives • Perfumes • Automobile Parts • Rubber belts • Tubes etc.

Specifications are indicative with no binding on KLJ Group.