Polymer & Engineering Compounds || VINYL || FLEX || PLENE || BATCH || XL || VA

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

FLEX (THERMOPLASTIC RUBBER COMPOUNDS - TPR ) >> FLEX ( THERMOPLASTIC ELASTOMER COMPOUNDS - TPE )

PRODUCT DATA SHEET

KLJ - FLEX - SS (COMPOUNDS BASED ON S.E.B.S.)

PROPERTIES	TEST METHOD	UNITS	SS 1040	SS 1050	SS 1060	SS 1070	SS 1080	SS 1090	SS 1150	SS 1160	SS 1170	SS 1180	SS 1190	SS2140 LCS	SS2150 LCS	SS2160 LCS	SS2170 LCS
Hardness	ASTM- 2240	Shore A	40 ± 3	50 ± 3	60 ± 3	70 ± 3	80 ± 3	90 ± 3	50 ± 3	60 ± 3	70 ± 3	80 ± 3	90 ± 3	40 ± 3	50 ± 3	60 ± 3	70 ± 3
Specific Gravity	ASTM- D-792	---	0.9	0.92	0.9	1.92	0.9	0.92	1.1	1.1	1.1	1.1	1.1	1.1	1.14	0.98	1.12
Tensile Strength	ASTM- D-638	Kg/cm2	50	50	55	75	85	105	40	45	60	75	100	25	35	35	55
Elongation At Break	ASTM- D-638	%	>500	>500	>500	>500	>500	>450	>450	>450	>400	>400	>400	>450	>450	>450	>400
Tensile Modulus (100% Elongation)	ASTM- D-638	Kg/cm2	20	22	30	35	55	55	20	26	38	38	50	20	21	22	35
Tear Strength	ASTM- D-1004	kN/m	25	27	30	32	50	50	24	25	35	35	50	12	15	17	27

KLJ - FLEX

PROPERTIES	TEST METHOD	UNITS	TO 1140	TO 1150	TO 1190	TV 1140	TV 1150	TV 1155	TV 1165	TV 1175	TV 1185	TV 1195	S 1155	S 1165	S 1170	S 1180	S 1190
Hardness	ASTM-2240	Shore	D40 ± 3	D50 ± 3	A90 ± 3	A40 ± 3	D50 ± 3	A55 ± 3	A65 ± 3	A75 ± 3	A85 ± 3	D40 ± 3	A55 ± 3	A65 ± 3	A70 ± 3	A80 ± 3	A90 ± 3
Specific Gravity	ASTM-D-792	---	0.93	0.93	0.93	0.92	0.94	0.92	0.94	0.94	0.94	0.94	0.94	1.03	1.03	1.01	1.01
Tensile Strength (At Break)	ASTM-D-638	Kg/cm2	190	150	140	30	270	40	65	80	150	190	30	35	45	70	110
Elongation At Break	ASTM-D-638	%	>500	>700	>500	>300	>500	>300	>350	>350	>400	>400	>400	>400	>400	>450	>450
Tensile Modulus (100% Elongation)	ASTM-D-638	Kg/cm2	20	22	30	35	55	55	20	26	38	38	50	20	21	22	35
Compression Set (23º 158 Hrs)	ASTM-D-395B	%	---	---	---	13	40	23	23	24	30	33	---	---	---	---	---
Tear Strength	ASTM-D-1004	kN/m	---	---	---	14	90	18	24	27	48	64	25	33	38	45	55

The above properties are indicative and represent the values as tested in our laboratories. There is no guarantee/ warranty whatsoever. Suitability of product for particular application may be verified before use.

Compounds have Excellent process ability, Excellent oil, Chemical & Heat Resistance, Available in all harness, High Impact Strength, Reusable/ Recyclable & Excellent Electrical Properties.

APPLICATIONS:-

Automotive	: Profiles, Steering Wheel, Horn pads, Gear Knobs etc……
Medical	: Disposable IV chamber straps, Baby teethers and bottles.
Consumer	: Tool grips, Tooth Brush grips, Pen grips, Electrical and building parts.

Wire & Cable, Home Appliances, Industrial Applications etc.